A third-party GE XWFE replacement with a built-in recognition chip — the feature that makes third-party cartridges viable on chip-checked GE boards.
About this cartridge
Most aftermarket GE cartridges fail not on filtration but on recognition: the control board cannot read a chip that is not there, so the filter light never clears. WD-F48C includes a chip, which is the whole reason it exists.
Its certification is narrower than the genuine part: NSF/ANSI 42 (aesthetic) and 372 (lead-free materials), not 53 or 401. That means chlorine, sediment and rust reduction is certified; lead and pharmaceutical reduction is not. If those claims matter to you, you need a cartridge carrying 53 and 401, which in this housing means the genuine XWFE.
Waterdrop rates the cartridge at 200 gallons or six months — a third less water than the genuine 300-gallon part, on the same six-month clock.
Also sold as
These part numbers refer to the same physical cartridge. If the number on your old filter is in this list, this is the right replacement.
Certified to 42 and 372 only. It is not an NSF 53 replacement for lead reduction, whatever the listing title implies.
Which refrigerators it fits
Waterdrop has not published a model-level list for this cartridge that we can verify, so we do not publish one either. The number on the cartridge you are removing is the reliable check.
Look up your refrigerator
Find the model sticker and search it here.
Browse refrigeratorsAll Waterdrop filters
Compare the cartridges in this housing family.
Open WaterdropReplacing it
- Turn the old cartridge a quarter turn counter-clockwise and pull it straight out. Keep a towel under it — a few ounces of water will come out.
- Remove the protective cap from the new cartridge and check that the O-rings are seated flat in their grooves.
- Push it in and turn clockwise until it stops. Run two to three gallons through the dispenser to flush carbon fines, then reset the indicator.