everydrop Filter 2, fitted to mid-size Whirlpool French door refrigerators. Frequently mistaken for Filter 1.
About this cartridge
Filter 2 carries part number W10413645A. It sits in the same interior position as Filter 1 on many models, which is exactly why people order the wrong one — the two look alike and differ mainly in length.
Certified to 42 and 53 at 200 gallons. Confirm the number printed on the cartridge you are removing before ordering.
Also sold as
These part numbers refer to the same physical cartridge. If the number on your old filter is in this list, this is the right replacement.
Not interchangeable with Filter 1 (W10295370A).
Which refrigerators it fits
Whirlpool has not published a model-level list for this cartridge that we can verify, so we do not publish one either. The number on the cartridge you are removing is the reliable check.
Look up your refrigerator
Find the model sticker and search it here.
Browse refrigeratorsAll Whirlpool filters
Compare the cartridges in this housing family.
Open WhirlpoolReplacing it
- Turn the old cartridge a quarter turn counter-clockwise and pull it straight out. Keep a towel under it — a few ounces of water will come out.
- Remove the protective cap from the new cartridge and check that the O-rings are seated flat in their grooves.
- Push it in and turn clockwise until it stops. Run two to three gallons through the dispenser to flush carbon fines, then reset the indicator.