GE's older slim cartridge, largely superseded but still in service in top-freezer models.
About this cartridge
GSWF is one of GE's earliest SmartWater designs. It fits top-freezer and a few side-by-side models from the 2000s, and stock is now mostly third-party.
Certified to 42 and 53. The housing is smaller than MWF and the cartridge is not interchangeable with it.
Also sold as
These part numbers refer to the same physical cartridge. If the number on your old filter is in this list, this is the right replacement.
Not an MWF replacement.
Which refrigerators it fits
GE has not published a model-level list for this cartridge that we can verify, so we do not publish one either. The number on the cartridge you are removing is the reliable check.
Look up your refrigerator
Find the model sticker and search it here.
Browse refrigeratorsAll GE filters
Compare the cartridges in this housing family.
Open GEReplacing it
- Turn the old cartridge a quarter turn counter-clockwise and pull it straight out. Keep a towel under it — a few ounces of water will come out.
- Remove the protective cap from the new cartridge and check that the O-rings are seated flat in their grooves.
- Push it in and turn clockwise until it stops. Run two to three gallons through the dispenser to flush carbon fines, then reset the indicator.
